{}

Design HB2 America

Reference Design Details

Design Hub

Search Reference Designs

avnet content library/home/design/design-hb2-america Design HB2 America

SubNav - Design Hub

Design Hub Menu

DESIGN HUB REGISTRATION
Home
My Designs
Design Tools ▾
Reference Designs
Resources

dh designs/americas/designs/stm32-dynamic-nfc-rfid-tag-solution-based-on-stmicroelectronics-st25dv64kc-expansion-board STM32 Dynamic NFC-RFID tag Solution based on STMicroelectronics ST25DV64KC Expansion Board

Script Application

This is a toast message

STM32 Dynamic NFC-RFID tag Solution based on STMicroelectronics ST25DV64KC Expansion Board

This design is based on the STMicroelectronics X-NUCLEO-NFC07A1 expansion board. This evaluation board is based on the ST25DV64KC dynamic NFC/RFID tag IC with a 64-Kbit dual interface EEPROM and fast transfer mode feature. It can be powered through the STM32 Nucleo development board or directly through the received carrier electromagnetic field. The board used the ST morpho, with the Arduino UNO R3 connector pin assignment. The board also features a single-layer antenna with a diameter of 54 mm and copper etched on the PCB.

av-dh-disclaimer-america

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET FOR ADDITIONAL INFORMATION.

avnet content library/home/design/av-dh-disclaimer-america av-dh-disclaimer-america

Related Designs Portlet

RELATED DESIGNS

BCM84891 and BCM84891L 10GBASE-T Single PHY based on Broadcom Solution

2798 views

Created: 04/14/2023

A reference design based on Broadcom's single-port 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX Ethernet CMOS transceiver.

View Design

STM32MP2 Series Reference Design based on STMicroelectronics Solution

2615 views

Created: 09/04/2024

This reference design features the second-generation of STM32MP2 microprocessors enabling secure, advanced edge AI in Industry 4.0.

View Design

STM32N6570-DK Discovery Kit based on STMicroelectronics Solution

1049 views

Created: 01/22/2025

The STM32N6570-DK Discovery kit is a complete demonstration and development platform for the Arm CortexM55 corebased STM32N657X0H3Q microcontroller, with ST Neural-ART accelerator embed.

View Design

Smart Ring based on Renesas Solution

933 views

Created: 06/29/2024

Smart rings offer a compelling opportunity for health tracking in a miniaturized format, serving as daily companions and fashion accessories.

View Design

BCM53134 1000Base-T Ethernet Switch based on Broadcom Solution

464 views

Created: 04/14/2023

BCM53134 1000Base-T based ethernet switch solution for next-generation Home Gateway, SOHO/SMB, and wireless router applications.

View Design

Gen5 PCIe Switches Block Diagram based on Broadcom Solution

458 views

Created: 04/14/2023

Reference design based on the new PCIe Gen 5.0 series of switches, built with Broadcom industry-leading 32GT/s PCIe SerDes.

View Design

100BASE-TX to 100BASE-T1 Media Converter Board based on Microchip Solution

338 views

Created: 06/29/2024

The EVB-LAN8770M_MC provides a simple method to exercise the LAN8770M 100BASE-T1 PHY by driving the common 100BASE-TX PHY via RJ45 connector.

View Design

BCM53162 RoboSwitch based on Broadcom Solution

326 views

Created: 04/14/2023

Ultra-Low Power TSN 1GbE/2.5GbE Switch with 10GbE Uplinks that meets the requirements of the new Automotive 2.0 market.

View Design

Industrial Autonomous Ground Vehicles based on SiTime Solution

261 views

Created: 07/29/2025

Autonomous Ground Vehicles are rapidly adopted as industries aim to automate repetitive, labor-intensive, and hazardous tasks, thereby enhancing efficiency, productivity, and overall safety.

View Design

BCM53460 Block Diagram based on Broadcom Solution

256 views

Created: 04/14/2023

Reference design based on the Broadcom BCM5346X, System-on-a-Chip (SoC) Ethernet switch family.

View Design

Automotive PCIe based on SiTime Solution

244 views

Created: 07/29/2025

This PCI Express (PCIe) reference design uses a point-to-point architecture with dedicated lanes for sending and receiving data. Each connection consists of two unidirectional lanes for transmit.

View Design

60 GHz Radar Sensor for Occupant Monitoring System (OMS) based on Infineon Solution

226 views

Created: 03/08/2024

Enhance comfort, safety & convenience with Infineon's 60 GHz Radar Sensor for Occupant Monitoring System, enabling smart features & compliance.

View Design

STM32 Dynamic NFC-RFID tag Solution based on STMicroelectronics ST25DV64KC Expansion Board

Tackling data center latency for AI: Why intra-DC microseconds matter as much as WAN milliseconds

By Avnet Staff - March 11, 2026

Within the data center, latency is a critical consideration for large-scale training and high-throughput inference setups. Leading AI training clusters are engineered for microsecond class communication.

How communications networks in high-performance data centers are evolving

By Avnet Staff - March 10, 2026

Data center networks evolved rapidly over the past decade, driven by the need to handle growing data volumes efficiently while managing power, space and cost. Learn about the technologies making the advancements possible.

How to choose NICs for AI data centers: Bandwidth, latency and offload explained

By Avnet Staff - March 9, 2026

Selecting network interface cards for AI data centers requires a balance of bandwidth, latency, off-load features and peripheral component interconnect express (PCIe) topology to optimize GPU cluster performance.

Pluggable vs. co-packaged optics in AI data centers: Power, scale and design trade-offs

By Avnet Staff - March 3, 2026

Pluggable optics have been the de facto choice in data center communication for years. However, in 2025, support for co-packaged optics grew. Power savings are a primary reason for change, but lower insertion losses are another potential benefit.

How N&C engineers can manage 7 top AI challenges

By Avnet Staff - February 4, 2026

AI-era networks are moving faster, their data denser, and their traffic flowing in more directions than ever before — and even tiny inefficiencies can amplify into system-wide slowdowns.

Bluetooth Channel Sounding takes positioning to a new level

By Avnet Staff - July 29, 2025

The Bluetooth Special Interest Group (SIG) has released Version 6.0 of the core specification and its newest feature, channel sounding, is challenging incumbent approaches to indoor positioning. Access is one reason, in more ways than one.

Bluetooth 6.0 vs. Bluetooth 5.4: Key advantages

By Avnet Staff - October 24, 2024

Bluetooth 6.0 comes with six new features of note. With centimeter-level positioning one of them and now available, will this change the way we navigate?

The future of 5G RedCap powers device expansion

By Benjamin Alvarez - August 6, 2024

Market adoption of 5G wireless networks has been slower than expected outside smartphone applications. The Reduced Capability standard was introduced to accelerate 5G expansion in markets where interest has been limited.

What happens when non-terrestrial and cellular converge?

By Carolyn O'Connor - August 5, 2024

OEMs and start-ups are paying attention to a development that places cellular and satellite technologies on a path to convergence. The growth of connected devices and associated traffic blurs the line between satellite and terrestrial networks.

How to evaluate 5G mmWave Phased Array Antenna Modules

By Steven Fireman - May 29, 2024

Faster 5G development requires hardware and software with proven compatibility, plus precision instruments and interconnects to ensure the stability and accuracy of test and simulation results.

Bringing mm-wave beamforming to new applications

By Steven Fireman - April 9, 2024

With 5G rolling out and the help of phased array antennas, the 30 to 300 GHz, and specifically the millimeter-wave bands, of the RF spectrum are making their way into applications like autonomous driving.

Will Ethernet cancel CAN?

By Avnet Staff - March 28, 2024

10BASE-T1S Ethernet is the perfect protocol for implementing zonal electronic and electrical architectures in automobiles. This article highlights how it meets automotive requirements and showcases the Onsemi product family.

STM32 Dynamic NFC-RFID tag Solution based on STMicroelectronics ST25DV64KC Expansion Board

RELATED EVENTS

Space 2.0: AMD Technologies for New Space

Date: February 23, 2022
Location: Webinar