{}

Design HB2 America

Reference Design Details

Design Hub

Search Reference Designs

avnet content library/home/design/design-hb2-america Design HB2 America

SubNav - Design Hub

Design Hub Menu

DESIGN HUB REGISTRATION
Home
My Designs
Design Tools ▾
Reference Designs
Resources

dh designs/americas/designs/battery-charger-for-power-tools-based-on-toshiba-solution Battery Charger for Power Tools based on Toshiba Solution

Script Application

This is a toast message

Battery Charger for Power Tools based on Toshiba Solution

Toshiba Power Tools Solution Proposal Battery Charger detail based on cordless power tools with low power consumption and thermal design of the set, bringing high torque and high efficiency of the motor.

av-dh-disclaimer-america

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET FOR ADDITIONAL INFORMATION.

avnet content library/home/design/av-dh-disclaimer-america av-dh-disclaimer-america

Related Designs Portlet

RELATED DESIGNS

Q-DPAK Full Bridge V2.1 Evaluation Board based on Infineon Solution

459 views

Created: 09/30/2025

The EVAL_QDPAK_FB_V2_1 evaluation board evaluates the switching capabilities of CoolSiC(TM) 750 V MOSFETs in Q-DPAK package.

View Design

25 kW Dual Active Bridge Bidirectional Power Converter based on STMicroelectronics Solution

341 views

Created: 08/01/2024

The STDES-DABBIDIR provides a complete solution for a bidirectional DC-DC power converter.

View Design

50 to 350 kW EV Charger Reference Design based on Infineon Solution

321 views

Created: 05/11/2023

50 to 350 kW EV charger system diagram from Infineon with high switching capability.

View Design

Exterior Front Lighting based on Diodes Solution

304 views

Created: 08/01/2024

Modern vehicle front lamp types and styles vary enormously, fueled by the efficiencies and capabilities that LED lamps bring.

View Design

3300W CCM totem pole PFC Main Board based on Infineon Solution

282 views

Created: 04/14/2023

3300W CCM totem pole PFC - 3300 W solution featuring CoolMOS and CoolSiC based on Infineon Solution.

View Design

AMD Zynq UltraScale+ ZU1/ZU2/ZU3 MPSoC Minimum Rails Power Tree based on MPS Solution

263 views

Created: 07/15/2025

This is a design is for powering AMD Zynq UltraScale+ family of SoCs with MPS Power Solutions.

View Design

Industrial Autonomous Ground Vehicles based on SiTime Solution

260 views

Created: 07/29/2025

Autonomous Ground Vehicles are rapidly adopted as industries aim to automate repetitive, labor-intensive, and hazardous tasks, thereby enhancing efficiency, productivity, and overall safety.

View Design

800 V Battery Management System (BMS) Reference Design based on NXP Design

247 views

Created: 06/29/2024

The RD-HVBMSCT800BUN is a reference design bundle for 800 V high-voltage battery management systems (HVBMS).

View Design

Servo Motor Drive based on NXP Solution

242 views

Created: 11/22/2023

Reference Design of s Servo Motor Drive Solution based on NXP

View Design

240 W LLC CV-CC Battery Charger Power Supply based on Power Integrations Solution

239 views

Created: 04/14/2023

240 W LLC CV/CC power supply for battery chargers (180 VAC to 264 VAC input; 48 V at 5 A output) using HiperLCS (LCS708HG) and LinkSwitch-TN (LNK302D)

View Design

Intel Altera Agilex Series Power Tree based on AnDAPT Solution

236 views

Created: 06/29/2024

The ARD_A_AGILEX is a scalable power supply designed to provide power to Altera Agilex devices.

View Design

UltraZed IO Carrier Card

206 views

Created: 04/14/2023

Development Board to evaluate UltraZed SOM Modules. This carrier card provides all of the necessary power, clock, reset control and SoC I/O pin accessibility.

View Design

Battery Charger for Power Tools based on Toshiba Solution

Wide bandgap continues to disrupt

By Philip Ling - December 15, 2025

The supply chain for wide bandgap (WBG) solutions is now maturing, which means we’re seeing consolidation, acquisition and even some attrition. This turbulence is both predictable and surmountable.

Ultra-wide bandgap surpasses GaN and SiC in power electronics

By Avnet Staff - December 2, 2025

Gallium oxide power semiconductors promise to revolutionize applications from EV powertrains to renewable energy and aerospace electronics with a leap in power conversion efficiency.

Beyond the datasheet: How to get more out of your primary cell batteries

By Philip Ling - May 22, 2025

The world relies on small electronic devices powered by even smaller primary cell batteries. We dispose of around 80 million non-rechargeable batteries every day. How can we use technology to get more power out of our batteries?

How 48V systems are supporting fully electric vehicles

By Philip Ling - July 22, 2024

The automotive supply chain for 48V subsystems has seen increased demand from mild hybrids. With the same solutions now going into plug-in hybrid and full battery electric vehicles, 48V is an active market segment.

Optimized power switching revs up for next-generation automotive applications

By Philip Ling - July 22, 2024

The move to zonal architectures is redefining the power distribution architecture. Automotive OEMs developing advanced features require optimized and intelligent power switches.

Understanding trade-offs for DC-DC converters in EV charging

By Avnet Staff - June 24, 2024

Within EV fast charging technologies, focus is on the crucial role of DC-DC converters in enabling efficient energy transfer. The design will be influenced by the primary commercial objective.

Designing Vienna Rectifiers for EV Chargers

By Avnet Staff - June 24, 2024

As the EV charging infrastructure grows, EVSE providers need to offer a choice. Cost, efficiency and reliability are trade-offs that begin at the component level and move quickly to the converter topology.

Passive components in EV chargers should be selected carefully

By Neil Willard - January 15, 2024

Demand for EV fast charging stations means passive components that can tolerate the high power/high energy environment are also drawing attention. Components such as DC link capacitors and magnetics need to be carefully selected for the application.

Explore the challenges and opportunities of bi-directional charging and EVs

By Miguel Tapia - December 7, 2023

In bi-directional charging, energy can flow into an EV battery, be extracted from it and routed back to the grid. With the momentum of climate protection, it’s poised to become a common feature in EVs.

Integrating EV charging with Matter and the smart home

By Harvey Wilson - October 5, 2023

With electric vehicles (EVs) becoming more common comes increased focus on how we charge them. How can we integrate the EV charger with other smart home systems, and what opportunities could this create?

How V2G benefits drivers and electricity suppliers

By Harvey Wilson - October 5, 2023

Vehicle-to-grid (V2G) enables EVs to send power from their batteries back to the main electricity grid. This will be hugely helpful in dealing with the inconsistency of renewables. However, it brings with it new technical and commercial challenges.

The future of EV charging: revolutionary developments are closer than you think

By Harvey Wilson - October 4, 2023

Electric vehicles (EVs) are big business. You only need to look at Tesla’s share price to see just how big. Imagine how much more valuable the market would be if EVs could charge in a few seconds, not minutes or hours.

dh designs/americas/designs/battery-charger-for-power-tools-based-on-toshiba-solution Battery Charger for Power Tools based on Toshiba Solution

Battery Charger for Power Tools based on Toshiba Solution

dh designs/americas/designs/battery-charger-for-power-tools-based-on-toshiba-solution Battery Charger for Power Tools based on Toshiba Solution