nRF9160 System-In-Package

Fully integrated SiP for cellular IoT

Low power SiP with integrated LTE-M/NB-IoT modem and GPS

The nRF9160 is a compact, highly-integrated System-in-Package (SiP) that makes the latest low power LTE technology and advanced processing and security accessible, and easy to use, for a wide range of single device low power cellular IoT (cIoT) designs.

Incorporating an Arm Cortex-M33 application processor solely for applications, a full LTE modem, RF Front End (RFFE) and power management system. The nRF9160 is the most compact, complete and energy-efficient cellular IoT solution on the market.

The integrated modem supports both LTE-M and NB-IoT and can operate globally, removing any need for regional variants. All power saving features, including eDRX and PSM, are supported with IPv4/IPv6 support up to transport and security (TCP/TLS) level. The modem firmware is upgradable via secure, encrypted Firmware Over The Air (FOTA) updates.

The Arm Cortex-M33 application processor is supported by 1 MB of flash and 256 KB RAM, making advanced application development possible in a single device solution. 

A GPS receiver is integrated into the radio, offering various modes of operation to suit a wide selection of applications that employ location-tracking functionality

Nordic's nRF9160 SiP

Security is best-in-class with Arm TrustZone technology for isolation and protection of normal and secure zones for firmware. This includes elements of hardware like memory and peripherals.

Arm CryptoCell enhances security further by offering cryptographic and security resources to help to protect your IoT applications from various attack threats.

nRF9160 DK

The nRF9160 DK is an affordable, pre-certified single-board development kit for evaluation and development on the nRF9160 SiP for LTE-M, NB-IoT and GPS.

It has a dedicated LTE-M and NB-IoT antenna that supports a wide range of bands, to operate globally. Included is a dedicated antenna for GPS and a 2.4 GHz antenna to be used with Bluetooth LE.

All GPIOs and interfaces (SPI/TWI/UART) are available via connectors. The kit is Arduino Uno Rev3 compatible, meaning it can be easily interfaced with external device shields.

User-programmable LEDs (4), buttons (2) and switches (2) are available to easily give input and get output. The nRF9160 DK has both a 4FF SIM card slot and an MFF2 SIM footprint, to support both plug-in and soldered (e)SIMs. It is bundled with an eSIM card from iBasis preloaded with 10 MB.

Programming and debugging is enabled through the Segger J-Link OB, which also supports external targets.

The nRF9160 DK is supported by a full suite of development software and tools. All free to download and use commercially.

Win a Nordic Semiconductor nRF9160 Development Kit for Cellular IoT & GPS Enhancements!

Kickstart your cellular IoT project using the Nordic Semiconductor nRF9160 equipped with sensors and interfaces that make it highly adaptable to rapid prototyping.

Nordic's nRF9160 DK

Nordic's nRF9160 SiP on PCB

Complete and submit this form to be entered to win a Nordic Semiconductor nRF9160 kit. Quantities are limited.

 

Kickstart your cellular IoT project with the Nordic Semiconductor nRF9160 Development Kit for Cellular IoT & GPS Enhancements. Buy it today or sign up below for our giveaway!

Nordic's NRF9160-dk

Buy Now

Key Features

  • Single board development kit for the nRF9160 SiP
  • 700-960 MHz + 1710-2200 MHz LTE band support
  • Same certification coverage as nRF9160 SiP
  • nRF52840 board controller
  • Arduino Uno Rev3 compatible
  • LTE-M/NB-IoT, GPS and 2.4 GHz antennas
  • SWF RF connectors for all antennas
  • Nano/4FF SIM card slot and MFF2 SIM footprint
  • SEGGER J-Link OB programmer/debugger
  • Pins for measuring power consumption
  • User-programmable LEDs (4), buttons (2) and switches (2)
  • 3.3-5.5 V supply from USB or external

Applications

  • Logistics and asset tracking
  • Smart city
  • Smart agriculture
  • Predictive maintenance and industrial
  • Wearables and medical