Resolutions ranging from 2Mp up to 45Mp
- 11 resolutions covering a broad range of applications
- Square and rectangular aspect ratios to maximize the use of the available FOV
- Various resolutions and speed grades providing a cost-efficient imaging solution
Full pin compatible
- Reduced Time-to-Market
- One footprint supports all resolutions from 2Mp up to 16Mp, while a second footprint supports the range from 20Mp up to a 45Mp
- All XGS family member have the same ‘look and feel’ (IP reuse)
Lower than state-of-the-art power dissipation
- Up to 2x the power savings compared to competition
- Easier thermal management of the camera
- Less impact on sensor performance (dark current, read noise, etc)
- Lower cost support electronics
Target Applications
- Generic Machine Vision
- Battery Inspection
- Semiconductor Inspection
- ITS, Intelligent Transportation Systems
- Broadcast (8K at 60fps)
| Parameter | Value |
|---|---|
| Resolution | 2Mp – 45Mp |
| Pixel Architecture | 3.2µm, FSI Global shutter |
| Optical Format | ½.2” up to super 35mm |
| Color Filter Array (CFA) | RGB / Monochrome |
| Chief Ray Angle (CRA) | 0, 4.7 or 7.3 degrees |
| Interface | 6-24 lanes HiSpi |
| Frame Rates @ Full Resolution | 220 full frames per second (fps) for the XGS 2000, up to 47fps for the XGS 45000 |
| Enhanced NIR QE | >0.2 at 850nm |
| Dynamic Range (dB) | 68 dB |
| Subsampling Modes | 1) Read one – skip one, (Mono) 2) Read two – skip two (Color) |
| Operating temp | -40 – 85º C |
| Package | CLGA / µPGA |
Resolutions ranging from VGA up to 25Mp
- 8 resolutions covering a broad range of applications
- Square and rectangular aspect ratios to maximize the use of the available FOV
- Various resolutions and speed grades providing a cost-efficient imaging solution
Pin compatibility amongst various resolutions
- Reduced Time-to-Market
- One footprint supports all resolutions from 300Kp up to 1.3Mp, a second footprint supports the range from 2Mp - 5Mp and a third footprint covers 16Mp - 25Mp
- All PYTHON family member have the same ‘look and feel’ (IP reuse)
High frame rate capability
- All PYTHON family members feature the quadratic speed increase in case of ROI read out (frame rate increases also in case x or the y of the window is reduced)
- The default frame rate is high enough to cover most applications
Target Applications
- Generic Machine Vision
- Battery Inspection
- Semiconductor Inspection
- ITS, Intelligent Transportation Systems
- Railway Inspection (Pantograph)
| Parameter | Value |
|---|---|
| Resolution | 300kp – 25Mp |
| Pixel Architecture | 4.5 (16-25Mp)/4.8µm (300k-5Mp), FSI Global shutter |
| Optical Format | 1/3.3” up to APS-C |
| Color Filter Array (CFA) | RGB / Monochrome / NIR |
| Chief Ray Angle (CRA) | 0, 10 degrees |
| Interface | Up to 32 LVDS |
| Frame Rates @ Full Resolution | 815 full frames per second (fps) for the PYTHON300, up to 80fps for the PYTHON25K |
| Enhanced NIR QE | >0.2 at 850nm |
| Dynamic Range (dB) | 59 dB |
| Subsampling Modes | 1) Read one – skip one, (Mono) 2) Read two – skip two (Color) |
| Operating temp | -40 – 85º C |
| Package | CLGA / µPGA |