FPF2496UCX

The FPF2496 advanced load-management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (G V) with stringent off-state current targets and high load capacitances 6100 VF). The FPF2496 consists of a slew-rate controlled low-impedance MOSFET switch (100 ma maximum) and integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. FPF2496 has over-voltage and over-temperature protection. The FPF2496 has a True Reverse-Current Blocking (TRCB) function that obstructs unwanted reverse current from VOIJT to VIN during ON and OFF states. The exceptionally low off-state current drain («2 PA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 3.5 V to 5.5 Voc to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial-device power management systems. Switch control is managed by a logic input (active LOW) capable of interfacing directly with low- voltage control signal / General-Purpose Input / Output (GPIO) without an external pull-down resistor. The device is packaged in advanced, fully "green"" compliant, 1.21 mm x 1.21 mm, Wafer-Level Chip- Scale Package (WLCSP)."

• Vin = 3.5 V-5.5 V
• 28 V Absolute Ratings at VIN
• Current Capability: 2.5 A
• Adjustable Current Limit: (Typ ) 0.1 A--2.5 A with 10% Accuracy
• RON: Maximum 100 m? at 5 VIN and 1A IOUT
• Input OVP: Min.-5.6 V, Typ = 5.8 V, Max = 6 V
• Output Discharge During Off State
• Open-Drain OVP on FLAGB
• Thermal Shutdown
• Under-Voltage Lockout (UVLO)
• True Reverse-Current Blocking (TRCB)
• Logic CMOS 10 Meets JESD76 Standard for
• GPIO Interface and Related Power Supply Requirements
• ESD Protected
  • Human Body Model- > 5.0 kV
  • Charged Device Model- > 2.5kV
  • IEC 61000-4-2 Air Discharge: > 15 kV
  • IEC 61000-4-2 Contact Discharge: > 8kV