FPF1039UCX

The FPF1039 advanced load-management switch target applications requiring a highly integrated solution for disconnecting loads powered from DC power rail («6 V) with stringent shutdown current targets and high load capacitances (up to 200 1-IF). The FPF1039 consists of slew-rate controlled low-impedance MOSFET switch (21 ma typical) and other integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. This device has exceptionally low shutdown current drain 61 1-IA maximum) that facilitates compliance in low standby power applications. The input voltage range operates from 1.2 V to 5.5 V DC to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low-voltage control signal / GPIO with no external pull-up required. The device is packaged in advanced fully "green"" Imm xl.5 mm Wafer-Level Chip-Scale Packaging (WLCSP); providing excellent thermal conductivity, small footprint, and low electrical resistance for wider application usage."

• 1.2 V to 5.5 V Input Voltage Operating Range
• Typical Ron:
  • 20 m? at Vin = 5.5 V
  • 21 m? at Vin = 4.5 V
  • 37 m? at Vin = 1.8 V
  • 75 m? at Vin = 1.2 V
• Slew Rate / Inrush Control with tR: 2.7 ms (Typical)
• 3.5 A Maximum Continuous Current Capability
• Output Capacitor Discharge Function
• Low <1 µA Shutdown Current
• ESD Protected: Above 8 kV HBM, 1.5 kV CDM
• GPIO / CMOS-Compatible Enable Circuitry