TJA1081BTS,118

The TJA1081B is a FlexRay node transceiver that is fully compliant with the FlexRay electrical physical layer specification V3.0.1. In order to meet the JASPAR-specific requirements, it implements the ‘Bus driver increased voltage amplitude transmitter’ functional class. It is primarily intended for communication systems from 2.5 Mbit/s to 10 Mbit/s and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1081B features enhanced low-power modes, optimized for ECUs that are permanently connected to the battery. The TJA1081B provides differential transmit capability to the network and differential receive capability to the FlexRay controller. It offers excellent EMC performance as well as effective ESD protection. The TJA1081B actively monitors system performance using dedicated error and status information (that can be read by any microcontroller), along with internal voltage and temperature monitoring. The TJA1081B supports mode control as used in the TJA1080A and is fully function and footprint compatible with the TJA1081.

Optimized for time triggered communication systems

• Compliant with FlexRay electrical physical layer specification V3.0.1
• Meets JASPAR requirementsas described in the ‘Bus driver increased voltageamplitude transmitter’ functional class
• Automotive product qualification in accordance with AEC-Q100
• Data transfer rates from 2.5 Mbit/s to 10 Mbit/s
• Supports 60 ns minimum bit time at 400 mV differential input voltage
• Very low ElectroMagnetic Emissions (EME) to support unshielded cable, meetinglatest industry standards
• Differential receiver with wide common-mode range for high ElectroMagnetic Immunity(EMI), meeting latest industry standards
• Auto I/O level adaptation to host controller supply voltage V_IO
• Can be used in 14 V, 24 V and 48 V powered systems
• Instant transmitter shut-down interface (via BGE pin)
• Independent power supply ramp-up for V_BAT, V_CC and V_IO