MCU-LINK-PRO

Fully featured debug probe that can be used with MCUXpresso IDE and 3rd party IDEs that support CMSIS-DAP and/or J-Link protocols. MCU-Link Pro is based on NXP’s MCU-Link architecture, found in the MCU-Link low cost debug probe and on board evaluation boards and runs the same firmware as all these implementations. In addition to SWD debug, SWO profiling and a USB to UART bridge features (VCOM) found in the base MCU-Link, the Pro model adds a J-Link LITE firmware option, energy measurement, analogue signal monitor, USB to SPI and I2C bridging capability and an on-board LPC804 for peripheral emulation. MCU-Link Pro is based on the dual Arm® Cortex-M33® core LPC55S69 microcontroller and features a high speed USB interface providing high performance debug at low cost.

• USB bridging feature is supported by the free LIBUSBSIO host library from NXP
• Compatible with Windows 10, MacOS and Linux
• Multiple status LEDs for ease of use interface
• VCOM interface with cable to connect to target system (TXD, RXD, ground)
• High-speed USB and USB to I2C and SPI bridging connectivity
• Compatible with MCUXpresso IDE
• Compatible with tools/IDEs that support CMSIS-DAP or J-Link protocol