MT29F32G08ABAAAWP-ITZ:A

MT29F32G08ABAAAWP-ITZ:A is a NAND flash memory. It includes an asynchronous data interface for high-performance I/O operations. This device uses a highly multiplexed 8-bit bus (DQx) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection (WP#) and monitor device status (R/B#). This Micron NAND Flash device additionally includes a synchronous data interface for high-performance I/O operations. When the synchronous interface is active, WE# becomes CLK and RE# becomes W/R#. Data transfers include a bidirectional data strobe (DQS). This hardware interface creates a low-pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign.

• Open NAND flash interface (ONFI) 2.2-compliant, single-level cell (SLC) technology
• RESET (FFh) required as first command after power-on
• Data strobe (DQS) signals provide hardware method for synchronizing data DQ in synchronous interface
• Copyback operations supported within the plane from which data is read
• Data retention: JESD47G compliant, endurance: 80,000 PROGRAM/ERASE cycles
• 32Gb density
• Operating voltage range VCC: 3.3V (2.7–3.6V), VCCQ: 3.3V (2.7–3.6V)
• 48-pin TSOP (CPL) package
• Industrial operating temperature range from -40°C to +85°C