Visit us at Future Mobility Asia 2023

Kria K26 System-on-Module

The newest path to whole application acceleration, the K26 SOM is optimized for edge vision applications requiring flexibility to adapt to changing requirements. Offered in Commercial and Industrial grades, the SOM features a custom-built Zynq® UltraScale+™ MPSoC device in a small form factor card ideal for production deployment in Smart Camera, Embedded Vision, and other Security, Retail Analytics, Smart City, and Machine Vision applications.

• Designed to enable smart city and smart factory applications
  • 3X vision AI performance and 2X performance-per-watt versus competing SOMs
  • Native ROS 2 support for 5X productivity for robotics and industrial automation

• Out-of-the-Box hardware acceleration
  • Leverage pre-built accelerated applications without needing FPGA design experience
  • Tailor AI models and application code to your requirements

• Production qualified and certified commercial and industrial grades
  • Commercial: operating range 0 to 85°C for smart camera, embedded vision, tracking & identification
  • Industrial: operating range -40 to 100°C and ruggedized for extreme environments

DURA EV™

• Positive locking features
• CPA (Connector position Assurance)
• Matting Poka-yoke
• Patented technology

Magnetic Stray Field Immunity

ams’ unique patented differential principle enables crossed differential measurements to ensure stray field immunity for all ams magnetic position sensors. This is a key benefit for our customers as it eliminates the effects of environmental factors such as stray magnetic fields, vibration, and misalignment. It also provides them with increased system safety, reliability and a reduced BOM (obsoletes the need for a magnetic shield).

Key features:

High-Speed FAKRA Mini Coaxial Cable Solutions

High-Speed FAKRA Mini (HFM) Coaxial Cable Solution delivers 20 GHz of data speed for the connected vehicle, supporting any modern radar, camera, LiDAR or sensor applications.

As the needs in the automotive market evolve into more complex ecosystems with tighter space requirements, customers will require multiple types of connector/cable housing configurations and multiple coaxial cable types to maximize electrical performance. HFM provides customers with design flexibility, as it is available in unsealed, sealed and in-line connectors, and in right angle and vertical PCB plugs and plug jacks.

Key features:

• Robust Crimp Termination: 26AWG 50 Ohm coax cable terminates both RG174 or RTK031 wire, providing a robust crimp termination of coax cable to the terminal.

• Reinforced Cable Housing: Complete with ISL and locking CPA latch feature to prevent terminal backout.

• Versatile, High-Performing PCB Header: 360˚ fully-diecast shielded-header core optimizes EMI/EMC Performance. Versatile options for circuit count, sealing, and right angle, vertical and inline options.

Quad-Row Board-to-Board Connectors

World’s smallest board-to-board connector ideally suited for space-constrained smartphones, smartwatches, wearables, AR/VR devices and more!

Customers want to fulfill the market demand for product miniaturization without compromising on performance parameters. Quad-Row board-to-Board Connectors deliver up to 3.0A power in a fine-pitch low-profile design.

Key features:

• First-ever staggered-circuit layout (with signal pin pitch of 0.175mm and 0.35mm soldering pitch): Offers unprecedented PCB space savings

• Robust connector features deliver increased strength for more reliable performance. These capabilities, along with a wide alignment, facilitate easy, secure mating and lower fallout rates.

• Suits a variety of high-volume production, diverse mix of applications requiring increasingly smaller PCBs and flex assemblies.

CMC/CMX Connector System

As automotive OEMs build the vehicle of the future, they must address the increasing need for more controllers near the engine. The Molex CMC/CMX connector system can help OEMs transform their vehicle architectures and gain a competitive edge.

This innovative family of products offers a wide range of sealed, high density, hybrid, wire-to-board and wire-to-wire off-the-shelf solutions designed to perform in harsh environments and in high-performance applications where currents are needed for up to 21.0A. CMC/CMX products are developed and validated according to the global automotive market’s strictest requirements.

Key features:

• A sealed, modular, high-density, on-demand solution:
  • validated solutions from one source
  • WTB and WTW sealed hybrid connector systems range from 22 to 154 circuit counts with signal, mid-power and power terminal sizes supplied for wire sections from 0.35 to 5.00mm² (ISO, TXL, FLRY types)

• Field-proven robustness and performance:
  • sealed IP6K7- and IP6K9K-rated products are specifically designed for harsh environments, such as temperatures ranging from -40° to +125°C and high vibration levels up to 25G with current ratings up to 21.0A

• Designed for tough global requirements:
  • meets the B21 7050, LV214, NDS and USCAR-2 specifications
  • addresses the most severe requirements for the European, Asian and U.S. automotive markets
  • supports smooth transition and growth into new markets

stAK50h Infotainment Connector System

• Standard USCAR color-coded housings supports visual polarization, expedites assembly of connector systems
• Compliance to USCAR-2 and global automotive OEM standards enables faster time-to-market
• 0.50mm and 1.20mm terminals developed around NanoMQS and AK (Arbeitskreis) Specifications supports a wide range of low-current signal (4.0A) and Ethernet applications

NVH820S75L4SPB−EVK(VE-Trac Direct EZ Kit 150KW)

• Inverter evaluation Hardware kit for EV/HEV Traction Inverter applications (up to 150kW)
• VE-Trac Direct power module with 820A, 750V Field stop 4 IGBT/Diode chipset and integrated direct cooling.
• Automotive Isolated high current and high efficiency IGBT gate driver with internal galvanic isolation, NCD57000.

6.6/7.2KW OBC CLLC Power Stage (Bidirectional)

• SiC MOSFETs
• Bidirectional functionality
• Excellent transient response
• Best-in-class efficiency
• Monotonic rising output
• Improved light load efficiency & output voltage ripple

6.6kW OBC SiC model

• SiC power devices and drivers.
• High power density, low current ripple
• Efficiency up to 95% @Vin=220V/AC, Vbus=400V, Vout=430V, Full Load
• FAN9673 - 3ch CCM (Continuous Conduction Mode) interleaved PFC controller
• NCV4390 - Advanced Secondary Side LLC Resonant Converter Controller with Synchronous Rectifier Control

Smart factory automation demo system

This Smart Factory Automation Demo System contains with a PLC (Programable Logic Controller) plus an HMI (Human Machine Interface), an IO-Link Master with EtherCAT and 8 IO-Link Devices including 8-ch DI & 8-ch DO, Temperature Sensor, TOF Distance Measurement Sensor, 4-ch Low-Side Driver for Tower Light, 32-ch High-Side Driver for Air Solenoid Valve, and a customer’s RFID reader/writer etc.

2 traditional ON/OFF switch type Sensors and 2 Run/Stop Push Buttons were added to the 8-ch DI. The systems also includes a remote-control Robotic Arm, with Proximity Sensor for human proximity sensing. With the PLC, we use the IO-Link Digital Inputs and Sensors, to control the related Digital Outputs and actuators, the HMI displays the IO Status, Actuators working status and Sensor Values.

We can also use the use Push Button to start the Robotic Arm’s programmed actions or stop it with the human proximity sensing. When people is approaching to the Robotic Arm, the PLC can send command to Robotic Arm to force stop actions immediately, after people move away, then the Robotic Arm receives command to resume action again, this is safety function to protect the operators around it.

2.0mm signal GRACE INERTIA connectors

• 2.00mm pitch connectors, available in 2 through 10 single row positions, and rated for up to 3A and 50V AC.
• Easy assembly with inertia locking, an anti-snag latch to prevent tangled wires, and color-coded connectors to avoid mis-mating.
• Supports automatic assembly with insulation displacement contacts (IDC) and surface mount (SMT) wire-to-board configuration.

FASTON Terminals

• Material options include tin plated brass and high temperature nickel plated steel, with temperature ratings up to 250 oC
• Dog-bone shaped front end provides a rolled edge mating surface with reduced insertion force
• Multiple crimping options, including F-Crimp, Tab-Lok and new 2D crimp technology, accommodate a wide range of wire sizes

Dynamic-D3200

• Pitch 5.08mm,2~20pos
• Double lock, keying & guide rib
• 3-points contact & Box Shape
• Voltage : 800V Max, Current :15A Max
• STANDARDS :
  USCAR
  UL1977
  ROHS
  REACH

ERNi Voltron & Bridge series & SMC

ECK, ECP

• 1000VDC 150A~300A switch or 500A carrying for ECK; 1500VDC 350A for ECP.
• Hermetically sealed with ceramic technology
• Built-in PWM economizer with low hold power
• DC-1 complaint.
• STANDARDS :
  IEC60947-4-1
  UL60947-4-1
  GB/T14048.4

3-Phase AC 400V Input PFC Converter Reference Design

• Toshiba SiC MOSFET improves AC-DC power supply efficiency
• 3-phase totem pole bridgeless configuration that switches each phase directly
• PFC circuit with 4kW output. 3-phase 400V AC input. Output voltage: 750V

5kW Isolated Bidirectional DC-DC Converter Reference Design

• Toshiba SiC MOSFET improves DC-DC power supply design
• Bidirectional high-power conversion by dual active bridge (DAB) method
• Solution with 5kW power ratings. High-side: 750VDC, Low-side: 400VDC

LED monocular demo set

• LED matrix headlight reference design from Toshiba demos independent control of multiple LEDs lightings
• Independent control of 42 LEDs simultaneously with small implementation area
• Total solution using MOSFETs, Gate drivers, Rectifier diodes and Zener diodes

Automotive Grade Silicon Controlled Rectifier (SCR)

Planar passivated Silicon Controlled Rectifier in a TO-247 plastic package intended for use in applications requiring very high inrush current capability and high thermal cycling performance. This product is qualified to AEC-Q101 standard for use in automotive Aapplications

• High thermal cycling performance
• Planar passivated for voltage ruggedness and reliability
• High voltage capacity
• Very high current surge capability
• AEC-Q101 compliant
• BT155W-1200T-A (TO-247)
• BT153B-1200T-A (D2PAK)

Automotive Grade Fast recovery Power Diode

• Low leakage current
• Low thermal resistance
• Low reverse recovery current
• Reduces switching losses in associated MOSFET or IGBT
• High operating temperature capability Tj(max) = 175°C
• AEC−Q101 Qualified
• Pb−Free, Halogen Free & RoHS compliant
• BYC30W-600PT2-A (TO-247 2L)
• BYV30W-600PT2-A (TO-247 2L)

Automotive Grade Silicon Carbide Diode

• New 6th Generation Technology
• Low Forward Voltage Drop
• Low Reverse Leakage Current
• High Forward Surge Capability IFSM
• Reduced losses in associated MOSFET
• Reduced EMI
• Reduced cooling requirements
• RoHS compliant
• AEC-Q101 qualified
• WNSC6D10650BT2-A (D2PAK)
• WNSC6D20650BT2-A (D2PAK)