Manufacturer:
onsemi
Product Category:
Drivers & Interfaces,
CAN Interfaces
NCV7356D1R2G
CAN Transceiver, 1 TX, 1 RX, 5 V to 27 V, 8 Pins, NSOIC
Avnet Manufacturer Part #:
NCV7356D1R2G
RoHS 10 Compliant
NCV7356D1R2G is a single-wire, CAN transceiver. It is a physical layer device for a single wire data link capable of operating with various carrier sense multiple access with collision resolution (CSMA/CR) protocols such as the bosch controller area network (CAN) version 2.0. This serial data link network is intended for use in applications where a high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices that use the network. The network shall be able to operate in either the normal data rate mode or a high-speed data download mode for assembly line and service data transfer operations. The high speed mode is only intended to be operational when the bus is attached to an off-board service node. This node shall provide temporary bus electrical loads which facilitate higher speed operation.
Key Features
- Fully compatible with J2411 single wire CAN specification
- Operating voltage range from 5.0V to 27V, selective BUS wake−up
- Logic inputs compatible with 3.3V and 5V supply systems
- Standby to sleep mode timeout, low RFI due to output wave shaping
- Fully integrated receiver filter, bus terminals short−circuit and transient proof
- Loss of ground protection, protection against load dump, jump start
- Thermal overload and short circuit protection, undervoltage lock out
- AEC-Q100 qualified and PPAP capable, bus short circuit current is 350mA maximum
- Operating junction temperature range from -40°C to +150°C
- 8-lead SOIC package
Technical Attributes
Find Similar Parts|
|
Description | Value |
|---|---|---|
|
|
Qualification | AEC-Q100 |
|
|
Operating Temperature Min | -40 °C |
|
|
Data Rate Max | 100 Kbps |
|
|
IC Case / Package | NSOIC |
|
|
No. of Receivers | 1 |
|
|
No. of Drivers | 1 |
|
|
Product Range | NCV7356 Series |
|
|
No. of Pins | 8 |
|
|
Supply Voltage Max | 27 V |
|
|
No. of Channels | 1 |
|
|
Supply Voltage Min | 5 V |
|
|
Operating Temperature Max | 125 °C |
ECCN / UNSPSC / COO
| Description | Value |
|---|---|
| ECCN: | EAR99 |
| SCHEDULE B: | PARTS... |
| HTSN: | PARTS... |