74HCT4051PW,118 by Nexperia Analog Switches, Multiplexers & Demultiplexers | Avnet Asia Pacific

Inactivity Warning Dialog

Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 30 minutes.

74HCT4051PW,118

Analog Multiplexer Single 8:1 16-Pin TSSOP T/R

74HCT4051PW,118 in Analog Switches, Multiplexers & Demultiplexers by Nexperia
Avnet Manufacturer Part #: 74HCT4051PW,118
RoHS 6 Compliant

The 74HC4051; 74HCT4051 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance with JEDEC standard no. 7A. The 74HC4051; 74HCT4051 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4051 and 4.5 V to 5.5 V for 74HCT4051. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).

Key Features

  • Wide analog input voltage range from -5 V to +5 V
  • Low ON resistance:
    • 80 Ω (typical) at VCC - VEE = 4.5 V
    • 70 Ω (typical) at VCC - VEE = 6.0 V
    • 60 Ω (typical) at VCC - VEE = 9.0 V
  • Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
  • Typical ‘break before make’ built-in
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Technical Attributes

Find Similar Parts
Description Value
Operating Temperature Max 125
Input Signal Type Single
IC Case / Package TSSOP
Mux / Demux Configuration 8:1, 1:8
No. of Channels 1
IC Function Analog Switch, Analog Multiplexer/Demultiplexer
Operating Temperature Min -40
Number of Channels per Chip 1
Maximum On Resistance Range 150 to 250 Ohm
Supply Voltage Range 4.5V to 5.5V, ± 5V
On Resistance Max 180
Propagation Delay Test Condition 50 pF
Power Supply Type Single Supply
Product Range HCT Series
Maximum Power Dissipation 500 mW
Maximum High Level Output Current 25 mA
Switch Configuration SP8T
No. of Pins 16
Maximum Propagation Delay Bus to Bus 8@?4.5V|12@4.5V ns
Output Signal Type Single-Ended
IC Mounting Surface Mount

ECCN / UNSPSC / COO

Description Value
ECCN: EAR99
SCHEDULE B: 8542390000
HTSN: 8542390001
CLEAR ALL Compare (0/10)