74HC4052BQ,115 by Nexperia Analog Switches, Multiplexers & Demultiplexers | Avnet Asia Pacific

Inactivity Warning Dialog

Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 30 minutes.

74HC4052BQ,115

Analog Multiplexer Dual 4:1 16-Pin DHVQFN EP T/R

74HC4052BQ,115 in Analog Switches, Multiplexers & Demultiplexers by Nexperia
Avnet Manufacturer Part #: 74HC4052BQ,115
RoHS 10 Compliant

The 74HC4052; 74HCT4052 is a high-speed Si-gate CMOS device and is pin compatible with the HEF4052B. The device is specified in compliance with JEDEC standard no. 7A. The 74HC4052; 74HCT4052 is a dual 4-channel analog multiplexer/demultiplexer with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW enable input. When pin enable input = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin enable input = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1.

Key Features

  • Wide analog input voltage range from -5 V to +5 V
  • Low ON resistance:
    • 80 Ω (typical) at VCC - VEE = 4.5 V
    • 70 Ω (typical) at VCC - VEE = 6.0 V
    • 60 Ω (typical) at VCC - VEE = 9.0 V
  • Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
  • Typical ‘break before make’ built-in
  • Complies with JEDEC standard no. 7A
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Technical Attributes

Find Similar Parts
Description Value
Operating Temperature Max 125
No. of Pins 16
IC Mounting Surface Mount
IC Case / Package DHVQFN
IC Function Analog Switch, Analog Multiplexer/Demultiplexer
Mux / Demux Configuration 4:1, 1:4
No. of Channels 2
Maximum On Resistance Range 150 to 250 Ohm
Propagation Delay Test Condition 50 pF
Power Supply Type Single Supply
Product Range HC Series
Maximum Power Dissipation 500 mW
Maximum High Level Output Current 25 mA
Supply Voltage Range 2V to 10V, ± 5V
On Resistance Max 225
Number of Channels per Chip 2
Output Signal Type Single-Ended
Input Signal Type Single
Operating Temperature Min -40
Switch Configuration SP4T

ECCN / UNSPSC / COO

Description Value
ECCN: EAR99
SCHEDULE B: 8542390000
HTSN: 8542390001
CLEAR ALL Compare (0/10)