74HC4051D-Q100,118 by Nexperia Analog Switches, Multiplexers & Demultiplexers | Avnet Asia Pacific

Inactivity Warning Dialog

Your session is about to timeout due to inactivity. Click OK to extend your time for an additional 30 minutes.

74HC4051D-Q100,118

Analog Multiplexer Single 8:1 16-Pin SO T/R

74HC4051D-Q100,118 in Analog Switches, Multiplexers & Demultiplexers by Nexperia
Avnet Manufacturer Part #: 74HC4051D-Q100,118
RoHS 10 Compliant

The 74HC4051-Q100; 74HCT4051-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance with JEDEC standard no. 7A. The 74HC4051-Q100; 74HCT4051-Q100 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4051-Q100 and 4.5 V to 5.5 V for 74HCT4051-Q100. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground). This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Wide analog input voltage range from -5 V to +5 V
  • Low ON resistance:
    • 80 Ω (typical) at VCC - VEE = 4.5 V
    • 70 Ω (typical) at VCC - VEE = 6.0 V
    • 60 Ω (typical) at VCC - VEE = 9.0 V
  • Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
  • Typical ‘break before make’ built-in
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 Ω)
    • CDM AEC-Q100-011 revision B exceeds 1000 V
  • Multiple package options

Technical Attributes

Find Similar Parts
Description Value
Propagation Delay Test Condition 50 pF
Operating Temperature Min -40
IC Mounting Surface Mount
IC Case / Package SOIC
Operating Temperature Max 125
Qualification AEC-Q100
Maximum On Resistance Range 150 to 250 Ohm
Number of Channels per Chip 1
No. of Channels 1
Mux / Demux Configuration 8:1, 1:8
IC Function Analog Switch, Analog Multiplexer/Demultiplexer
Output Signal Type Single-Ended
No. of Pins 16
Input Signal Type Single
Maximum Propagation Delay Bus to Bus 8@?4.5V|10@6V|12@4.5V|60@2V ns
Maximum Power Dissipation 500 mW
Switch Configuration SP8T
Maximum High Level Output Current 25 mA
Supply Voltage Range 2V to 10V, ± 5V
On Resistance Max 180
Product Range HC Series
Power Supply Type Single Supply

ECCN / UNSPSC / COO

Description Value
ECCN: EAR99
SCHEDULE B: 8542390000
HTSN: 8542390001
CLEAR ALL Compare (0/10)