SSQE48T07120-NABNG

The new SSQE48T07120 DC-DC converter is an open frame sixteenth-brick DC-DC converter that conforms to the Distributed Open Standards Architecture (DOSA) specifications. The converter operates over an input voltage range of 36 to 75 VDC, and provides a tightly regulated output voltage with an output current up to 7 A. The output is fully isolated from the input and the converter meets Basic Insulation requirements permitting a positive or negative output configuration. The converter is constructed using a single-board approach with both planar and discrete magnetics. The standard feature set includes remote On/Off (positive or negative logic), input undervoltage lockout, output overvoltage, overcurrent, and short circuit protections, output voltage trim, and overtemperature shutdown with hysteresis. With standard pinout and trim equations and excellent thermal performance, the SSQE48T07120 converters can replace in most cases existing eighth-brick converters. Inclusion of this converter in a new design can result in significant board space and cost savings.

• RoHS lead-free solder and lead-solder-exempted products are available
• Industry-standard DOSA pinout
• Output: 12 V at 7 A
• On-board input differential LC-filter
• Start-up into pre-biased load
• No minimum load required
• Weight: 0.44 oz [12.3 g]
• Meets Basic Insulation requirements of IEC60950
• Withstands 100 V input transient for 100 ms
• Fixed-frequency operation
• Hiccup overcurrent protection
• Fully protected (OTP, OCP, OVP, UVLO)
• Remote sense
• Remote ON/OFF positive or negative logic option
• Output voltage trim range: +10%/-20% with industry-standard trim equations
• Low height of 0.374” (9.5mm)
• Industry standard 1/16th brick footprint: 0.9” by 1.3”
• High reliability: MTBF = 16 million hours, calculated per Telcordia TR-332, Method I Case 1
• UL/CSA60950-1 recognized in US and Canada and TUV certified per IEC/EN60950-1
• Designed to meet Class B c