Renesas Analog Signal Chain Solutions

Renesas Analog Signal Chain Solutions - Body

Display portlet menu

Renesas Analog Signal Chain Solutions

Renesas' precision analog portfolio provides a wide range of next-gen precision instrumentation, medical, communication and industrial process control applications where innovation, reliability and dependability is central to the analog designs. Renesas' precision analog products are built on the latest technology; we offer a wide portfolio of general purpose analog building blocks targeted at precision signal chain design. With proven proprietary processes and package technologies, Renesas ships over one billion ICs per year with less than 1.2 DPPM (defective parts per million). Our strong technology development and multi-sourcing strategy from multiple leading-edge semiconductor foundries and assembly/test partners ensures a steady product supply with reduced risk.

Interface

Renesas offers industry-leading devices to enable efficient and reliable communication for industrial control, networking, and computing applications. Dual protocol transceivers, I2C Buffers, wide operating voltage range RS-232 transceivers, and RS-485/422 devices with the highest noise immunity and ESD protection in small packages are available to support high-speed data transfer and a variety of configurations to fit your application.

±60V OVP, ±20V CMR, 3.3V–5V Transceiver Family

Device Speed
(Mbps)
Duplex Slew rate limited Enable pins Cable Invert Low power SHDN Packages
ISL32450E 0.25 Full Yes Yes No Yes SOIC-14, MSOP-10
ISL32452E 0.25 Half Yes Yes No Yes SOIC-8, MSOP-8
ISL32453E 1 Full Yes Yes No Yes SOIC-14, MSOP-10
ISL32455E 1 Half Yes Yes No Yes SOIC-8, MSOP-8
ISL32457E 0.25 Half Yes Tx only Yes No SOIC-8, MSOP-8
ISL32458E 20 Half No No No Yes SOIC-8
ISL32459E 20 Half No Tx only Yes No SOIC-8
 

RS-485 20Mbps 3.3V Over Voltage Protected (OVP) Transceivers

  • Fault protected RS-485 bus pins: up to ±60V
  • Extended common-mode range: ±20V, larger than required for RS-485
  • ±15kV HBM ESD protection on RS-485 bus pins
  • Wide supply range: 3V to 5.5V
  • Cable invert pin (ISL32457E and ISL32459E only) corrects for reversed cable connections while maintaining Rx full fail-safe functionality
  • 1/4 unit load for up to 128 devices on the bus
  • High transient overvoltage tolerance: ±80V
  • Full fail-safe (open, short, terminated) RS-485 receivers
 

RS-485/RS-422 Fastest, Most Reliable & Smallest Transceivers

  • High speed data transfer - Up to 40Mbps (ISL3159E/79E); Up to 100Mpbs (ISL3259E)
  • IEC61000 ESD protection; 15kV air gap and 8kV contact discharge
  • ISL3159E features extended Vod performance (>2.1V) and 5V operation
  • Meets PROFIBUS® requirements and delivers enhanced noise immunity or can drive longer cables
  • 5V and 3.3V versions with +125°C options in small packages (DFN, MSOP) as well as SOIC
  • Full fail-safe receiver and hot plug Tx and Rx outputs
  • Prevents data corruption when cable faults occur or when a new node is added to an active bus
 

Part Family

  • ISL3245xE: Single Transmitter/Receiver RS-422/RS-485, 0.25 Mbps - 20Mbps
  • ISL3179E: Single Transmitter/Receiver RS-422/RS-485, 40 Mbps, Half Duplex
  • ISL3180E: Single Transmitter/Receiver RS-422/RS-485, 40 Mbps, Full Duplex
  • ISL3159E: Single Transmitter/Receiver RS-422/RS-485, 40 Mbps, Half Duplex
  • ISL3259E: Single Transmitter/Receiver RS-422/RS-485, 100 Mbps, Half Duplex
 

Digital Power Monitors

Renesas' ISL2802x digital power monitor (DPM) family delivers high accuracy measurements in a wide input common mode voltage range (0V to 60V), providing designers with the high level of safety margin that is often necessary in wired, wireless and data infrastructure applications.

isl20822.jpg
  • The ISL28022 is a bidirectional high-side and low-side digital current sense and voltage monitor with serial interface.
  • The ISL28023 is a precision DPM that integrates the analog comparators, a voltage regulator, a DAC and a low voltage auxiliary channel in a single chip.
  • The ISL28025 is a high precision DPM with integrated analog comparators and an integrated voltage regulator.
 

Part Family

  • ISL28022: 0V to 60V, 10 Ld MSOP, 16 Ld QFN
  • ISL28023 : 0V to 60V or 0V to 12V, 24 Ld QFN
  • ISL28025: 0V to 60V or 0V to 12V, 16 Ld WLCSP
 

Precision Instrumentation Amplifiers (Programmable)

Zero-drift-amp-block_755pxw.jpg

The ISL2853x and ISL2863x family of ultra-high precision instrumentation amplifiers (in-amps) feature zero-drift circuitry that provides auto offset voltage correction and noise reduction, delivering very low offset voltage drift of nV/°C and a low 1/F noise frequency corner down in the tens of mHz range. These in-amps integrate precision matched resistors for the front gain stage and the differential second stage, providing very high gain accuracy and excellent CMRR.

  • Zero-drift instrumentation amplifier
  • 9 pin selectable gain options: Av = 1 to 1,000
  • Rail-to-rail input/output
  • Single-ended output (ISL28533, ISL28534, ISL28535)
  • Differential output (ISL28633, ISL28634, ISL28635)
  • RFI filtered inputs improve EMI rejection

 

Devices

  • ISL28533 - Single Ended Output; 2.5V-5V; PGIA, 14 Ld TSSOP
  • ISL28534 - Diff Output; 2.5V-5V; PGIA,14 Ld TSSOP
  • ISL28535 - Single Ended Output; 2.5V-5V; PGIA,14 Ld TSSOP
  • ISL28633 - Diff Output; 2.5V-5V; PGIA,14 Ld TSSOP
  • ISL28634 - Single Ended Output; 2.5V-5V; PGIA,14 Ld TSSOP
  • ISL28635 - Diff Output; 2.5V-5V; PGIA,14 Ld TSSOP
 

Resources

Application Notes:

INTERFACE

 

DIGITAL POWER MONITOR

 

DIGITAL POWER MONITOR

 

PRECISION AMPLIFIERS

 

White Papers:

INTERFACE

 

DIGITAL POWER MONITOR

 

Product Brochure

Analog Signal Chain Kits and Tools - Grid

Display portlet menu

Analog Signal Chain

Kits & Tools

Avnet and our supplier partners offer a broad range of development kits, evaluation boards, design resources and design references to support the research phase of new projects and get your projects to market faster.

Signal chain solutions

At Avnet we have partnered with IDT, Renesas and Microchip to support the research and design phase of your next Signal Chain design.