Cypress Products for FPGA & SOC

Cypress Memory And Timing Devices - Body

Display portlet menu

Cypress offers the world’s broadest portfolio of SRAMs, including synchronous, asynchronous, QDR, and dual-port SRAMs. Cypress also offers the industry’s fastest, most energy-efficient, and highest reliability Nonvolatile RAM solutions to capture and protect the world’s most critical data. Cypress compliments these products with an extensive offering of NAND and NOR Flash memory. Cypress continues to invest in innovative memories to address the increasing performance demands of mission-critical systems everywhere. Cypress is the one-stop supplier for high-performance memories today and in the future. Cypress memories are well suited for FPGA and SoC designs based on both proven performance and close collaboration with the leading FPGA providers on product development and reference designs.

HyperFlash™ NOR Flash

High density (128Mb – 512Mb) HyperFlash NOR Flash memories are based on the high-bandwidth, 12-signal HyperBus interface that transfers information over 8 I/O signals at double data rate (DDR). They deliver the highest read bandwidth at 333MB/s, over four times faster than Quad SPI NOR flash with one-third the number of pins of parallel NOR flash.

Resources:

 

HyperRAM™ Self-Refresh DRAM

Cypress HyperRAM memory is the first companion device to HyperFlash memory and the second device to operate on the 12-pin HyperBus Interface. With a read/write throughput up to 333 megabytes-per-second, the 64-Mbit HyperRAM devices are an ideal solution for external scratchpad memory for controllers with limited onboard RAM. This provides a scalable solution for rendering of high-resolution graphics or calculations of data-intensive firmware algorithms for industrial, IoT applications and consumer applications.

To accelerate FPGA product design cycles, Cypress offers customers a HyperBus Master Interface Controller IP Package. This controller IP helps designers add support for HyperBus to their FPGA host controller platform. The Controller IP supports both HyperFlash and HyperRAM products, and is free of charge and royalty-free.

Part Numbers

 

Resources:

 

Async SRAM

See Part Details

Cypress Async SRAMCypress is the industry leader in Asynchronous SRAMs, with the widest portfolio of Fast & Micropower Asynchronous SRAMs. With product offerings ranging from 64-Kbit up-to 32-Mbit, Asynchronous SRAMs are available in a wide variety of voltage, bus-width, and package options. Cypress Fast SRAM devices offer fast access times (8-12ns) which makes them an ideal choice in applications such as switches and routers, IP-phones, test equipment, DSLAM cards, and automotive electronics. Cypress Micropower SRAM devices offer industry leading Standby Power dissipation specifications, which makes them ideal for high-performance, battery powered and battery-backed solutions across a range of industrial and consumer application segments. Cypress has also introduced Asynchronous SRAMs with ECC, the latest member of its Asynchronous SRAM product family.

Async Fast SRAMs

Cypress offers the industry's broadest portfolio of Fast Async SRAM devices, with products ranging from 64-Kbit up-to 32-Mbit. Fast SRAMs are available in a wide variety of industry-standard voltage, bus-width, and package options. Cypress has also introduced a new family of Fast Asynchronous SRAMs, Fast SRAM with PowerSnooze™, that combines the access time of Fast SRAMs with the standby current of Micropower SRAMs. Fabricated using Cypress's high-performance CMOS technology, Fast Asynchronous SRAMs offer fast access times (8-12ns) which makes them an ideal choice in applications such as switches and routers, IP-phones, test equipment, DSLAM cards, and automotive electronics.

Micropower Async SRAMS

Cypress's MoBL® (More Battery Life) SRAM devices form the industry's broadest portfolio of Asychronous Micropower SRAM devices, with active offerings ranging from 64-Kbit up-to 64-Mbit. MoBL® SRAMs are available in industry-standard voltage, bus-width, and package options. Cypress Micropower SRAM devices offer industry leading Standby Power dissipation specifications. This makes them ideal for high-performance, battery powered and battery-backed solutions across a range of industrial and consumer application segments.

Async SRAM with ECC

Cypress, the world leader in SRAMs, has introduced Asynchronous SRAMs with ECC, the latest member of its Asynchronous SRAM product family. These SRAMs have on-chip Error Correcting Code & bit interleaving, and offer industry leading reliability with maximum FIT rates of 0.1FIT/Mb. These devices also come with an additional ERR pin to indicate detection and correction of single bit errors. With the performance to serve a wide variety of industrial, communication, data processing, medical, consumer and military applications, Fast and Micropower (MoBL®) SRAM devices are form-fit-function compatible with existing Asynchronous SRAM devices based on older technology nodes. This allows improve system reliability improvement without PCB re-design.

Resources:

 

Sync SRAM

Cypress Sync SRAMCypress has the industry’s broadest Sync SRAM portfolio with more than 2,300 different products. Rated #1 for performance and reliability, these products have industry leading Random Transaction Rate (RTR up to 2132 MT/s), FIT rates (less than 0.01-FIT/Mb). Cypress Sync SRAM products are suitable for systems running mission critical applications such as switches and routers, RADAR and signal processing, test equipment, automotive and military

QDR-II+ & QDR-II+ Xtreme

Cypress’s QDR-II+ is a high performance, dual-port SRAM memory. QDR-II+ SRAM offers a maximum speed of 550 MHz, densities up to 144 Mb, read latencies of 2 or 2.5 cycles, burst length of 2 or 4, and is available in an industry-standard 165-ball FBGA package. QDR-II+ Xtreme SRAM operates up to 633 MHz and is available in 36 Mb or 72 Mb densities. QDR-II+ products also offer optional programmable On-Die Termination (ODT).

QDR-IV

  • Two Bidirectional Data Ports: High transaction rates for any mix of read/write operations
  • On-Chip ECC: Built-in error correction provides data integrity and virtually eliminates soft errors
  • Bus Inversion: Reduces switching noise and power consumption
  • Deskew Training Sequence: Improves signal capture timings at high frequencies
 

Resources:

 

Nonvolatile RAM

Cypress Semiconductor is the worldwide leader in Nonvolatile RAM (NVRAM) products with the broadest portfolio on the market and over 1 billion devices shipped. Cypress has two complimentary families of NVRAM products: F-RAM, the industry’s most energy-efficient serial NVRAM solution, and nvSRAM, the industry’s fastest parallel NVRAM solution. Cypress was the first to produce F-RAM and nvSRAM products and has 25 years of experience in NVRAM technology.

See Part Details

F-RAM

  • 4Kb to 4Mb densities
  • Serial I2C and SPI interface options
  • Parallel interface options
  • Low power, instant data capture on power loss
  • 100 trillion cycle endurance
  • No batteries required to store data on power loss; RoHS compliant
  • Radiation and magnetic field tolerant
  • Processor Companions with integrated analog and digital functions
 

nvSRAM

  • 64Kb to 16Mb devices
  • Asynchronous parallel and ONFI 1.0 interface options
  • Serial interface options
  • As low as 20 ns access times
  • Infinite endurance
  • No batteries required to store data on power loss; RoHS compliant
  • Optional Real Time Clock (RTC)
 

Resources:

 

NOR Flash Memory

NOR flash memories for embedded systems features the highest performance High Performance, Parallel Page Mode NOR flash and Quad SPI NOR flash memories delivering up to 333 MB/s read bandwidth, with the industry leading program and erase, and extended automotive temperature ranges (-40°C to 125°C).

See Part Details

High Performance, Parallel Page Mode NOR 

The Cypress GL NOR Flash family is optimized for the voltage, density, cost-per-bit, reliability, performance and scalability needs of a wide variety of embedded applications. With densities from 32 Mb to 2 Gb, each device requires only a single 3.0 V power supply for read and write functions and is entirely command set compatible with the JEDEC Flash standards. 

Quad SPI NOR

Cypress FL Serial Flash Memory offers a reduced pin count for lower system cost while providing optimal read/write performance for a variety of automotive, networking, consumer electronics and industrial applications.

FL-S

Densities form 128 MB up to 1 Gb. Hybrid Sector Architecture. Read speed in Single, Dual and Quad I/O modes up to 133 MHzSDR, and up to 80 MHz DDR delivering read bandwidth of up to 80 MBps. Industry leading Programming performance (up to 1.08 MBps).

FL1-K

Densities of 16 Mb up to 64 Mb. Uniform 4 KB Sector Size. Read speed in Single, Dual and Quad I/O modes up to 108 MHz SDR delivering read bandwidth of up to 54 MBps. Fast Programming performance of 365 KBps.

Resources:

 

Cypress NAND Flash MemoryNAND Flash Memory

Cypress NAND products add reliable, high density data storage to the Cypress flash product line. Cypress applies its stringent process for qualification, testing, extended temperature support and packaging to its line of SLC NAND products.

NAND Flash Memory

Cypress’s high performance and high reliability SLC NAND product portfolio is available in 1Gb - 16 Gb densities. There are two standard product families offering 1bit and 4 bit ECC SLC NAND. There is also SecureNAND which is an SLC NAND with enhanced security features. All these products are backed by world-class customer support and commitment for longevity of supply.

See Part Details

Resources:

 
Product Voltage Interface Density
S34ML 3V NAND Flash Memory with 1 and 4 bit ECC requirement x8 or x16 I/O interface 1Gb - 16Gb
S34MS 1.8V NAND Flash Memory with 1 and 4 bit ECC requirement x8 or x16 I/O interface 1Gb - 16Gb
S34SL 3V NAND Flash Memory with enhanced security features and 4 bit ECC requirement x8 I/O interface 1Gb - 4Gb
 

Timing

See Part Details

High Performance Clock Generator

Cypress High Performance Clock Generators supports frequencies up to 700MHz with RMS Phase Jitter of < 1ps. These devices support reference clocks for popular interface standards such as PCIe 1/2/3, 10 GbE, SATA 1.0/2.0 and USB 1.0/2.0/3.0. Cypress portfolio of High Performance Clock Generators includes 4-PLL High Performance Clock Generator and FleXO™ High Performance Oscillator. Cypress will also soon sample(April’16) another High Performance Programmable Oscillator supporting frequencies up to 2.1 GHz and with RMS Phase Jitter of 110 fs. 

Standard Performance Clock Generators

Cypress has a broad portfolio of standard performance clock generators with frequency support of 200 MHz and Cycle to Cycle jitter of 100 ps. They support a host of value-added features such as VCXO, Spread Spectrum and Output Phase Alignment. Cypress portfolio of Standard Performance Clock Generators includes Application Specific Clocks, EMI Reduction Clocks, Programmable Clocks, Programmable XOs and VCXO Clocks.

PLL/SSCG ICs

These are built in dual modulus pre-scaler, adaptable from 50MHz to 3GHz and it can make up low noise small serial input Phase Locked Loop (PLL) frequency enabling pulse swallowing operation.

High Performance Buffers

High Performance Buffer (HPB) is a family of ultra low-jitter non-PLL clock fanout buffers that delivers up to 10 high-frequency (up to 1.5GHz) differential outputs (LVPECL, LVDS, or CML).  HPB delivers the industry’s lowest additive jitter (0.06ps typical RMS phase jitter) and can provide complete high-frequency, low-jitter clock tree solutions in conjunction with FleXO clock generators.

Standard Performance Buffers

Cypress has a broad standard Performance Buffers portfolio including Non-Zero Delay Clock Buffers, Zero Delay Buffers and RoboClock™ Skew Management Buffers. We support single-ended clocks up to 200 MHz and up to 20 outputs.

Resources:

Warning

Warning

Invalid configuration found. Contact the administrator.