Ultra96 Introductory Bundle with Hackster.io

Display portlet menu

Ultra96 Introductory Bundle with Hackster.io

02 Jul 2019 - 13 Nov 2019

online, on-demand


hackster.io logo 

In this 3-course technical training bundle you will learn the fundamentals of developing software applications, building a custom hardware platform, and running the PetaLinux tools to build embedded Linux for Ultra96. Each course takes about 6-7 hours to complete. This single online bundle gives you access to all three introductory courses at a pace you desire.

Developing Zynq UltraScale + MPSoC Software With Xilinx Software Development Kit 2018.3

This course explores the fundamental concepts of the Xilinx Software Development Kit (SDK). Using a pre-built hardware platform, you will learn how to navigate the SDK environment and develop some basic C-code examples for the Ultra96 / Ultra96-V2 board.

  • Connect the SDK to hardware for execution and debug
  • Utlilize a peripheral interrupt to show real-time software response
  • Learn to use an external sensor module
  • Explore how to import hardware into your Xilinx SDK environment
  • Introduction to the Xilinx SDK

Instructor: Adam Taylor

Developing Zynq UltraScale + MPSoC Hardware With Xilinx Vivado 2018.3

This course will teach you how to develop a Zynq UltraScale+ MPSoC hardware platform using the Xilinx Vivado tools while also learning ZU+ architecture. Vivado is used to configure the processing system parameters, including clocking, memory interface, and peripherals. Vivado is also used to develop custom hardware in the programmable logic. Build a working hardware platform that runs your code on the Ultra96 / Ultra96-V2 board.

  • Introduction to the Zynq UltraScale + MPSoC development flow with Vivado's IP Integrator
  • Introduction to the Zynq UltraScale + MPSoC Architecture, including the Arm Cortex™-A53 processor
  • Utilize the Xilinx embedded systems tool to:
    • Design a Zynq UltraScale + MPSoC system
    • Add Xilinx and custom IP
    • Run software applications to test the IP
    • Debug an embedded system

Prerequisites

  • Developing Zynq UltraScale + MPSoC Software course or applicable experience

Instructor: Adam Taylor

Integrating Sensors on Ultra96 with PetaLinux 2018.3

From within an Ubuntu OS running within a virtual machine, learn how to install PetaLinux and build embedded Linux targeting Ultra96 or Ultra96-V2. In the hands-on labs learn about Yocto and PetaLinux tools to import your own FPGA hardware design, integrate user space applications, and configure/customize PetaLinux.

  • Import existing Vivado hardware designs into PetaLinux
  • Add custom applications into PetaLinux
  • Build, customize, and configure PetaLinux for Ultra96

Prerequisites

  • Developing Zynq UltraScale + MPSoC Software course or applicable experience

Instructor: Adam Taylor

 

 

REGISTER NOW

Xilinx Ultra96 Introductory Bundle | Avnet Silica

Display portlet menu

RELATED EVENTS

Participate in our webinar wherever you are

BD71847AMWV - How to Power the NXP i.MX 8M Mini Processor Family Efficiently

18 Sep 2019 - 31 Dec 2019
online, on-demand

We will introduce you to the BD71847, provide a general product overview and addressable applications, and take a look at the buck performance as well as timing results necessary to power-up and down the NXP processor safely.

Participate in our webinar wherever you are

Webinars about the RX65N and RX651

12 Aug 2019 - 31 Dec 2019
online, on-demand

Do you want to get started with the RX65N Cloud Kit or the RX651? Then watch the free, on-demand webinars provided by Renesas.

Participate in our webinar wherever you are

How to start with Azure Sphere

12 Sep 2019 - 31 Dec 2019
online, on-demand

Learn how a simple MCU solution can submit data highly secured to the cloud without you having to worry about the security.