Qseven™ has in recent years become the most widely adopted new standard for small form factor modules, specifically targeted towards applications that demand low power consumption.

The new MSC Q7-AL module features Intel's next-generation low-power System-on-Chip (SOC) for the Internet of Things. The Intel Atom Processor E3900 series integrates processor core, graphics, memory, and I/O interfaces into one solution and provides considerably higher graphics and computing performance compared to its predecessors. MSC Q7-AL offers triple independent display support, DirectX 12, fast DDR3L-1866 memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.1 module.

The new MSC Q7-AL module features Intel's next-generation low-power System-on-Chip (SOC) for the Internet of Things. The Intel Atom Processor E3900 series integrates processor core, graphics, memory, and I/O interfaces into one solution. Based on 14nm processor technology this multi-core processor provides outstanding computing and graphics performance and is more power efficient compared to its predecessors.  
 
MSC Q7-AL moduleThe new MSC Q7-AL offers triple independent display support, DirectX 12, fast DDR3L-1866 memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.1 module.  
 
Different SOCs with dual- and quad-core processors are supported by this design. In addition to an extensive set of interfaces and features, the MSC Q7-AL optionally offers hardware based security compliant to the requirements of TCG (Trusted Computing Group).  
 
For evaluation and design-in of the MSC Q7-AL module, MSC provides suitable Qseven Rev. 2.0 platform board. A complete, ready-to-run Starterkit is also available. 

 

Key specifications:

  • Intel Atom x7-E3950 quad-core 1.6/2.0GHz, 12W
  • Intel Atom x5-E3940 quad-core 1.6/1.8GHz, 9.5W
  • Intel Atom x5-E3930 dual-core 1.3/1.8GHz, 6.5W
  • Intel Pentium N4200 quad-core 1.1/2.5GHz, 6W
  • Intel Celeron N3350 dual-core 1.1/2.4GHz, 6W
  • Integrated Intel Gen. 9 HD Graphics
  • Up to 8GB DDR3L SDRAM, dual-channel, ECC support (optional)
  • Up to 64GB eMMC Flash (optional)
  • Two SATA-III interfaces (6Gbps)
  • DisplayPort++ interface
  • LVDS/Embedded DisplayPort interface
  • Triple Independent Display support
  • DirectX 12, OpenGL 4.3, OpenCL 2.0
  • Up to 4x PCI Express x1 Gen. 2
  • Up to 3x USB 3.0 Host interfaces
  • Up to 8x USB 2.0 Host interfaces
  • 1x USB Host/Device support
  • Gigabit Ethernet
  • UART, LPC, SPI, I2C, SMBus
  • HD Audio, SD Card interface
  • Trusted Platform Module (optional)
  • Qseven Rev. 2.1 compliant
  • UEFI Firmware

The MSC Q7-BW module is based on Intel‘s multi-core system-on-chip (SOC) Atom generation ("Braswell") that integrates next generation Intel processor core, graphics, memory, and I/O interfaces into one solution. Based on 14nm processor technology this multi-core processor provides outstanding computing and graphics performance and is more power efficient compared to its predecessors.

MSC Q7-BW moduleThe new MSC Q7-BW brings triple independent display support, DirectX 11.1, fast DDR3L-1600 memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.0 compliant module.

Different SOCs with dual- and quad-core processors are supported by this design. Next to an extensive set of interfaces and features, the MSC Q7-BW optionally offers hardware based security compliant to the requirements of TCG (Trusted Computing Group).

For evaluation and design-in of the MSC Q7-BW module, MSC provides suitable Qseven Rev. 2.0 platform boards. A complete, ready-to-run Starterkit is also available.

 

 

 

Key specifications:

  • Intel Pentium N3710 quad-core 1.6/2.56GHz, 6W
  • Intel Celeron N3160 quad-core 1.6/2.24GHz, 6W
  • Intel Celeron N3060 dual-core 1.6/2.48GHz, 6W
  • Intel Celeron N3010 dual-core 1.04/2.24GHz, 4W
  • Intel Atom x5-E8000 quad-core 1.04/2.0GHz, 5W
  • Integrated Intel Gen. 8 HD Graphics
  • Up to 8GB DDR3L SDRAM, dual-channel
  • Up to 64GB eMMC Flash (optional)
  • Up to 64GB SATA NAND Drive (optional)
  • Up to 2x SATA-III interfaces (6Gbps)
  • DisplayPort/HDMI/DVI interface
  • LVDS/Embedded DisplayPort interface
  • Triple Independent Display support
  • DirectX 11.1, OpenGL 4.2, OpenCL 1.2
  • Up to 3x PCI Express x1 Gen. 2
  • Up to 2x USB 3.0 Host interfaces
  • Up to 8x USB 2.0 Host interfaces
  • 1x USB Host/Device support*
  • Gigabit Ethernet
  • UART, LPC, I2C, SMBus
  • HD Audio, SD Card interface
  • Trusted Platform Module (optional)
  • Qseven Rev. 2.0 compliant
  • UEFI Firmware

MSC Q7-BT moduleThe MSC Q7-BT module is based on the Qseven Rev. 2.0 and using Intel's multi-core System-On-Chip (SOC) Atom generation that integrates next generation Intel processor core, graphics, memory, and I/O interfaces into one solution. Based on Intel's 22nm processor technology, this multi-core Atom processor provides outstanding computing and graphics power and is more power efficient compared to its predecessors. The new MSC Q7-BT brings dual independent display support, DirectX 11.1, fast DDR3L memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.0 compatible module. Different SOCs with single-, dual- and quad-core processors are supported by this design. Next to an extensive set of interfaces and features, the MSC Q7-BT offers hardware based security compliant to the requirements of TCG (Trusted Computing Group). For evaluation and design-in of the MSC Q7-BT module, MSC provides a number of development platforms. A complete, ready-to-run Starterkit is also available.

 

 

Key specifications:

  • Intel® Atom™ System-On-Chip with Quad-/ Dual- /Single-Core Processor:
    • E3845 Quad-Core, 1.91 GHz, 10W TDP
    • E3827 Dual-Core, 1.75 GHz, 8W TDP
    • E3826 Dual-Core, 1.46 GHz, 7W TDP
    • E3825 Dual-Core, 1.33 GHz, 6W TDP
    • E3815 Single-Core, 1.46 GHz, 5W TDP
    • E3805 Dual-Core, 1.33 GHz, 3W TDP
  • Up to 4GB DDR3L SDRAM (opt. ECC)
  • Up to 64GB SATA NAND Drive (optional)
  • Up to 32GB eMMC Flash (optional)
  • 2x SATA-II interfaces (1 used for opt. Flash Disk)
  • Integrated Intel Gen. 7 HD Graphics
  • HDMI up to 1920x1200
  • DisplayPort 1.1a up to 2560x1600
  • Dual-Channel LVDS 24 or 18 bit up to 1920x1200
  • Dual Simultaneous Display support
  • Gigabit Ethernet
  • 3x PCIe x1 Gen. 2.0 ports
  • USB 3.0 Host, optional USB 3.0 Device
  • Up to 6x USB 2.0 Host, optional USB 2.0 Device
  • UART, LPC, HD Audio, SPI, I2C, SMBus, SDIO, opt. TPM

The design of the MSC Q7-IMX6PLUS module was optimized to provide an especially economic platform for NXP’s i.MX6 and i.MX6Plus CPUs offering quad-core, dual-core and single-core ARM® Cortex™-A9 compute performance at very low power consumption and excellent graphics performance combined with a high degree of functional integration.

MSC Q7-IMX6PLUS moduleThe MSC Q7-IMX6PLUS CPU Module provides a choice of computing performance ranging from economic single-core to high-performance quad-core power in combination with a high graphics performance and low power consumption available over a wide temperature range.

It incorporates the i.MX 6 (Solo, DualLite, Dual or Quad) or the i.MX 6DualPlus or 6QuadPlus processor with up to 1.2 GHz, up to 4GB DDR3 DRAM and up to 64GB eMMC Flash memory as well as an extensive set of interface controllers. The module provides the new Qseven Rev. 2.0 interface, allowing easy integration with Qseven baseboards

For evaluation and design-in of the Q7-IMX6PLUS modules, MSC provides a development platform, target platform and a starter kit. The MSC Q7-IMX6PLUS module is supported by Linux and Windows Embedded Compact 7 and 2013 (Android on request).

 

 

Key specifications:

  • NXP™ i.MX 6 ARM® Cortex™-A9 Solo, DualLite, Dual, Quad, DualPlus and QuadPlus processor
  • MPEG-4 Video Encoding/Decoding 1080p
  • HDMI graphics 1920 x 1080 x 30fps
  • Dual-channel LVDS 1920 x 1080 x 30fps
  • Up to 4GB DDR3L SDRAM
  • Up to 64GB eMMC Flash
  • Gigabit Ethernet Interface
  • 1x PCI Express x1
  • 1x SATA-II (3Gbps, quad-/dual-core only)
  • 1x USB Device/Host + up to 4x USB 2.0
  • 1x MMC/SD/SDIO Interface
  • CAN Interface
  • I2S Audio Interface
  • MIPI CSI-2 Camera Interface (optional)
  • Micro SD Card Socket

Customization

Avnet Integrated offers customization of its standard modules according to the requirements of the customers. This will help to achieve required price points for volume projects by not populating components which are not required, i.e. less memory or less controllers of unnecessary functionality. In addition, Avnet Integrated offers to assemble Computer-on-Modules on carrier boards, optionally with suitable cooling and with memory modules inserted. 

CUSTOMIZED ASSEMBLY – INDIVIDUAL SOLUTIONS

  • Mounted and tested (memory, cooling, baseboard)
  • Individual test profile
  • Pre-configured BIOS
  • Baseboard Electronic Manufacturing Service (EMS)

To find out more about our standard embedded board solutions and how we can design, make, supply and deliver them to suit your manufacturing needs,
get in touch with us!

Lets talk RRD - SHARED - no green line

Display portlet menu

Let's talk

Need help with a product design? Get in touch with us using this form.

Contact Us