New Product Introduction

EBV Elektronik DB-UBLASTER2

DB-UBLASTER2 with 2.54 mm connector for standard Intel JTAG header

EBV Elektronik DB-UBLASTER2 product-picture

JTAG programming USB blaster cable with CE certification for Intel FPGAs. DB-UBLASTER2 with 2.54 mm connector for standard Intel JTAG header.This device comes with housing and 1 m USB-Cable Type C / Type A. The DB-UBLASTER2 is compatible to the original Altera USB-Blaster II and uses the same software driver. It can be used with JTAG voltages from 1.8 V to 3.3 V.The Tool version can be connected directly to the standard 10pin 2.54 mm pin header on the Board without any flex cable. The DB-UBLASTER2 comes with 17 x 37 x 9 mm dimension.

 

Key features

  • The DB-UBLASTER2 is a USB to JTAG converter
  • The device is ROHS-II compliance.
  • VCC(TRGT) : -0.3...5.5 V
  • VCC(USB) : -0.3...5.5 V

 

Additional features

  • DB-UBLASTER2 conforms to the following standards or other normative documents:
    • EN 55022 : 2010
    • EN 55024 : 2010
    • Following the provisions of directive 2014 / 30 / EU (EMC)
  • The DB-UBLASTER2 is a USB to JTAG converter compatible to the USB-Blaster II of Intel.
    It can be used with the standard Intel Drivers to communicate between a PC (USB) and the FPGA device (JTAG)
  • The device is ROHS-II compliance.
     
  • VCC(TRGT) : -0.3...5.5 V
  • VCC(USB) : -0.3...5.5 V
  • Ii : -10...10 mA
  • Io : -50...50 mA
  • Dimension: 17 x 37 x 9 mm

 

Applications

  • Intel FPGA JTAG programming cable.

EBV Elektronik DB-UBLASTER2 | EBV Elektronik

Display portlet menu

Related parts

  • DB-UBLASTER2 DEV


Do you have a Question?

Contact EBV

If you need any assistance, please click below to find your closest EBV sales office.

Related documents



Related markets



Related technologies