The MAXREFDES101# is a unique evaluation and development platform in a wrist-worn wearable form factor that demonstrates the functions of a wide range of Maxim’s products for health-sensing applications.
The DRV8304 device is an integrated gate driver for 3-phase brushless DC (BLDC) motors applications for 12-V and 24-V DC rails.
Simply Secured - Industrial IoT's First Pre-Integrated Edge-to-Cloud Cybersecurity Solution.
The i.MX 6ULZ processor is a high-performance, ultra-efficient consumer processor featuring an advanced implementation of a single ARM® Cortex®-A7 core, which operates at speeds up to 900 MHz.
The BQ25121A is a highly integrated battery charge management IC that integrates the most common functions for wearable devices
ESDA22P150-1U3M is a 20V VRM unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
The ST25R3911B is a highly integrated NFC Initiator / HF Reader IC, including the analog front end (AFE) and a highly integrated data framing system.
RAMK is the magenetic encoder. It can detect the position of the joint of the robotic arm and converts a mechanical angular position into an electrical signal with very high precision.
nRF52840 is an ultra-low power 2.4 GHz wireless system on chip (SoC) integrating a multiprotocol 2.4 GHz transceiver, an ARM® Cortex®-M4F CPU and flash program memory.
The ESDCAN0x-2BWY are a dual-line Transil specifically designed for the protection of the automotive CAN bus lines against electrostatic discharge (ESD).
This solution provides protection from highenergy surges originating from switching and/or higher voltage transients.
Wisol Sigfox modules for applications such as smart city, animal tracking, asset tracking, metering communication, smart sensor communication, smart button, health care etc.
TE Connectivity’s latest Industrial IP20 RJ45 Cat. 6A plug is based upon common core technology, a platform technology used in the entire industrial RJ45 product family.
The CC3220x wireless MCU family is part of the second generation of TI’s Internet-on-a-chip™ family of solutions.
Both MCU families offer the industry’s lowest power consumption, as well as have capacitive touch capability with best-in-class water tolerance and noise immunity.
RF Module Based STM32 Nucleo Expansion Board
N-channel Trench MOSFET, N-channel TrenchMOS standard level FET and Single Zener diodes from Nexperia. Nexperia is a dedicated global leader in discretes, logic and MOSFETs devices.
The OnBoard Security TrustSentinel 2.0 is a fully-supported, industrial-strength TSS 2.0 solution for platforms and applications using TPM 2.0.
With more than 65 years in the electronics industry, Bel is a trusted name in providing highly engineered products that Power, Protect and Connect electronic circuits.
The AR0522 is a 1/2.5-inch 5.1 Megapixel (MP) image sensor based on a 2.2 micrometer (μm) Back Side Illuminated (BSI) pixel technology platform.
Maxim Integrated MAXQ1061 DeepCover® Cryptographic Controller are embedded security solutions that support highly secure key storage.
Zener diodes permitting 500 mW power dissipation.
The MAX1720x/MAX1721x are ultra-low power stand-alone fuel gauge ICs that implement the Maxim ModelGauge™ m5 algorithm without requiring host interaction for configuration.
The 600 V CoolMOS™ CFD7 is Infineon’s latest high voltage superjunction MOSFET technology with integrated fast body diode and completes the CoolMOS™ 7 series.