Products

Texas Instruments DS90C189-Q1

The DS90C189-Q1 is a low power bridge for automotive applications that reduces the size of the RGB interface between the host GPU and the Display.

The DS90C189-Q1 Bridge is designed to support single pixel data transmission between a Host and a Flat Panel Display at resolutions of up to QXGA (2048x1536) at 60 Hz. The transmitter converts up to 24 bits (Single Pixel 24-bit color) of 1.8 V LVCMOS data into two channels of 4 data + clock (4D+C) reduced width interface LVDS compatible data streams.

DS90C189-Q1 supports 2 modes of operation.

  • In single pixel mode in/out mode, the device can drive up to SXGA+ (1400x1050) at 60 Hz. In this mode, the device converts one bank of 24-bit RGB data to a one channel 4D+C LVDS data stream.
     
  • In single pixel in / dual pixel out mode, the device can drive up to WUXGA+ (1920x1440) at 60 Hz. In this configuration, the device provides single-to-dual pixel conversion and converts one bank of 24-bit RGB data into two channels of 4D+C LVDS streams at half the pixel clock rate. 

For all the modes, the device supports 24bpp color.

The DS90C189-Q1 is offered in a small 64 pin QFN package and features single 1.8 V supply for minimal power dissipation.

Features

  • 150 mW Typical Power Consumption at 185 MHz (SIDO mode)
  • Drives QXGA and WQXGA Class Displays
  • Two Operating Modes:
  • Supports 24-Bit RGB
  • Supports 3D+C, 4D+C, 6D+C, 6D+2C, 8D+C, and 8D+2C LVDS Configurations
  • AEC-Q100 Qualified for Automotive Applications 
  • Compatible With FPD-Link Devices
  • Operates Off a Single 1.8 V Supply
  • Interfaces Directly With 1.8 V LVCMOS
  • Less Than 10 mW Power Consumption in Sleep Mode
  • Spread Spectrum Clock Compatible
  • Small 9 mm × 9 mm × 0.9 mm 64-Pin VQFN Package


Applications

  • Camera Monitor Systems (CMS)
  • Automotive Head Unit
  • Smart Mirror
  • Cluster


Block diagram

Texas Instruments DS90C189-Q1

 

Contact us

Newsletter

Subscribe for Online Delivery

SIGNUP