While capturing a still image or a video clip on a bright, sunny day can be straightforward, the situation becomes much more complicated when lighting is uncontrolled. A street at night, an underground garage, a dark corner with little illumination – these are the type of situations where a standard image sensor may not be sufficient.
Fortunately, several different technologies are available which can enhance an image sensor’s ability to successfully capture an image under these types of challenging lighting. Specialized color filter arrays increase the amount of visible light available for capture, or enable capture of near-infrared light. Pixel designs can be modified to maximize the amount of light that can be captured by the image sensor, and advanced electron multiplication technology can enable detection under sub-lux illumination.
ON Semiconductor has implemented these technologies – and more – in a portfolio of image sensors designed for use in challenging lighting conditions. See how these advanced devices, available from Avnet Silica, can help solve your low-light imaging needs.
Technologies for low light image sensing
|IT-EMCCD||Interline Transfer Electron Multiplication CCD combines the high imaging performance available from Interline Transfer CCD technology with the sub-electron noise floor provided by electron multiplication.||Learn more|
|RGB-IR||RGB-InfraRed is a different filter type where one green spot in the standard Bayer Color Filter Array (CFA) is substituted with a spot which admits the Near-Infrared (NIR) wavelength to reach the sensor.||Learn more|
|Clarity+||Clarity+ is an alternative filter where, in the standard Bayer Color Filter Array (CFA), the green spots are substituted with clear spots, allowing the entire visible spectrum to pass through.||Learn more|
|HDR||High-Dynamic Range is a technology more efficient for photo capturing than for video. To take an HDR photo, the sensor takes different shots of the same scene at different exposure times and then mixes the shots by selecting the best.||Learn more|
|BSI||Back-Side Illumination, as the definition suggests, is referring to the part of the sensor which is actually exposed to the light.||Learn more|
AR0230AT Digital Image Sensor
AR0230AT is a 1/2.7-inch CMOS digital image sensor with an active-pixel array of 1928Hx1088V. It is designed for both low light and high dynamic range scene performance.Shop Now
AR0238 Digital Image Sensor
AR0238 is a 1/2.7-inch CMOS digital image sensor with an active-pixel array of 1928Hx1088V. It captures images in either linear or high dynamic range modes, with a rolling-shutter readout.Shop Now
AR1820HS Image Sensor
AR1820HS is an 18 megapixel, 1/2.3-inch format, 1.25 um pixel sensor using A-PixHS™ BSI technology. With a variety of operating modes, the AR1820HS can dynamically optimize resolution, low-light and frame rate for environmental conditions.Shop Now
KAE-02150 Image Sensor
KAE-02150 Image Sensor is a 1080p (1920 x 1080) CCD in a 2/3” optical format that provides exceptional imaging performance in extreme low light applications.
Transform Your Thinking with Avnet & ON Semiconductor
It’s never too late to transform your thinking around what technology solutions providers can do for you.Learn More
Designing For IoT, the Edge
While individual power requirements vary across the IoT, the need for energy efficiency will be present everywhere.Learn More