The LM26LV/LM26LV-Q1 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (TTRIP) can be preset at the factory to any temperature in the range of 0°C to 150°C in 1°C increments. Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability.
In normal operation the LM26LV/LM26LV-Q1 temperature switch outputs assert when the die temperature exceeds TTRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (TTRIP − THYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the (OVERTEMP)\ digital output, is active-low with an open-drain structure.
The analog output, VTEMP, delivers an analog output voltage with Negative Temperature Coefficient (NTC).
Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the VTEMP output pin, which could be used to verify the temperature trip point.
The LM26LV/LM26LV-Q1's low minimum supply voltage makes it ideal for 1.8 Volt system designs. Its wide operating range, low supply current, and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.
Low 1.6V Operation
Low Quiescent Current
Latching Function: Device Can Latch the Over Temperature Condition
Push-Pull and Open-Drain Temperature Switch Outputs
Wide Trip Point Range of 0°C to 150°C
Very Linear Analog VTEMP Temperature Sensor Output
VTEMP Output Short-Circuit Protected
Accurate Over −50°C to 150°C Temperature Range
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection
LM26LVQISD–130 and LM26LVQISD-135 are AEC-Q100 Grade 0 Qualified and are Manufactured on an Automotive Grade Flow. For Other Trip Points, Contact Your Sales Office.