AES-ZU3EGES-1-SOM-G by Avnet Engineering Services | Development Kits | Avnet AMERICAS
Close
Close
Close
printPRINT image Bookmark Share
Send a link to this page
Please enter a valid Email id
Link
Send to
jsmith@baa.com
sjohnson@baa.com
Add another address
Add another address
Add another address
Subject
Message

AES-ZU3EGES-1-SOM-G

Avnet Engineering Services

UltraZed-EG™ SOM - Zynq UltraSCALE 3EG based

Manufacturer Part #: AES-ZU3EGES-1-SOM-G

Alternate Part #: AES-ZU3EGES-1-SOM-G


legend NCNR

Descriptions

Documents

Subs/Alternatives

Information

UltraZed-EG SOM is a highly flexible, rugged, System-On-Module (SOM) based on the Xilinx Zynq® UltraScale+ MPSoC. Designed in a small form factor, the UltraZed-EG SOM packages all the necessary functions such as system memory, Ethernet, USB, and configuration memory needed for an embedded processing system. The UltraZed-EG provides easy access to 180 user I/O pins, 26 PS MIO pins, and 4 high-speed PS GTR transceivers along with 4 GTR reference clock inputs through three I/O connectors on the backside of the module.

Designers can simply design their own carrier card, plug-in UltraZed-EG SOM, and start their application development with a proven Zynq UltraScale+ MPSoC sub-system. Available with the Zynq UltraScale+ MPSoC XCZU3EG-SFVA625 device, the UltraZed-EG SOM enables designers to build high-performance systems with confidence and ease. By simply plugging the off-the-shelf UltraZed-EG SOM into an application specific carrier card, system bring-up and debug time can be cut in half, while overall system cost can be reduced by 20% or more verses a standard chip-down design.

Key Features

  • Xilinx XCZU3EG-1SFVA625 device
  • DDR4 SDRAM (2GB, in x32 configuration)
  • Dual QSPI Flash (64MB)
  • I2C EEPROM (2Kb)
  • eMMC Flash (8GB, in x8 configuration)
  • USB 2.0 ULPI PHY
  • Gigabit Ethernet PHY
  • I2C 8-bit I/O expander
  • 2-channel I2C switch/mux
  • PS reference clock input
  • On-board voltage regulators
  • Power-On Reset (POR) circuit
  • 4-position boot mode DIP switch
  • Linux BSP and reference designs
  • 3 JX micro-header connectors (2 x 140-pin, 1 x 100-pin) providing the following connections to the Carrier Cards
  • 180 user PL I/O pins
  • 26 user PS MIO pins (one full MIO bank)
  • 4 PS GTR transceivers
  • 4 PS GTR reference clock inputs
  • PS JTAG interface
  • PL SYSMON interface
  • USB 2.0 connector interface
  • Gigabit Ethernet RJ45 connector interface
  • PMBus interface
  • SOM PS VBATT battery input
  • Carrier Card I2C interface
  • SOM Reset input
  • Carrier Card interrupt input
  • Carrier Card Reset output
  • Power Good output
  • SOM to Carrier Card ground pins
  • SOM input voltages and output sense pins

Technical Attributes

Description
Value
Find similar Parts
Max Processing Temp
85 °C
GPIO
YES
Package Dimensions
2.0 X 3.5 in
Ethernet
YES
USB
USB OTG

ECCN / UNSPSC

Description
Value
ECCN:
4A994
SCHEDULE B:
8471500150
HTSN:
8471500150
UNSPSC:
32101502
UNSPSC VERSION:
V15.1101

Block Diagram

Block Diagram Zoom
Block Diagram

Documents

Type
Document Title
Download
Product-Guides
Block-Diagram
Bill-of-Materials
BOM
Mechanical-and-3D-Drawings
Reference-Designs
Mechanical-and-3D-Drawings
Support-and-Download-Files
Mechanical-and-3D-Drawings
Mechanical-and-3D-Drawings
Support-and-Download-Files
Added to your BOM
This item has been added to your "Exact Matches"
Add to BOM
Add to new BOM
Your BOM's
CLOSE

Your Price:

USD    $599.00
  • More available in: 2 weeks
  • Quantity:

    - | +

    Min: 1  Mult: 1


    image

    Invalid Quantity

    Need More?Request Quote

    Need More?Request Quote

    SubTotal


    Add to Cart

    Add To BOM