AMP SIAMEZE insulation displacement (IDC) terminals for interconnecting copper magnet wires, lead wires, and other components.
The AMP SIAMEZE insulation displacement (IDC) technology eliminates the need to strip the film insulation from copper magnet wires and lead wires
Terminals are available in wire-to-wire, Lead Lok, quick disconnect tabs, posts, pin and receptacle terminals
Standard Range SIAMEZE terminals terminate 34-18 AWG [0.16-1.0 mm] copper magnet wires. Fine Range SIAMEZE terminals terminate 36-27 AWG [0.13-0.38 mm] copper magnet wires.
Medium Range and Heavy Range SIAMEZE terminals terminate 23-12 AWG [0.56- 2.03 mm] copper magnet wires.
Available with either Moving Beam contacts whereby a single terminal connects to a very wide range of magnet wire sizes, or a Compliant Beam for contacting two magnet wires of the same diameter in one terminal for splicing or bi-filar applications.
According to specifications SIAMEZE cavities are either integrated into coil bodies or specially designed cavity housings. The magnet wires are positioned in the “U” shaped slots.
The SIAMEZE Inserter cuts the terminals from the strip and places the terminals over the magnet wire into the plastic cavities. During this operation the small stripping devices penetrate the film insulation from the magnet wire.
Residual spring energy in the terminal causes the side walls of the IDC slot to function as opposing cantilever beams.
This constant pressure results in an intimate metalto-metal interface, providing a reliable, long-term connection.
The wiping action between the wire and terminals remove all oxides or other contaminants present on both the conductor and the terminal slot side walls, producing a clean, stable, gas-tight electrical termination.
The AMP SIAMEZE Inserter may be used as a semiautomatic bench machine or integrated in production lines for fully-automatic applications.
Terminates all copper magnet wire film insulations
Eliminates need for prestripping conductors
Moving Beam contact design connects a wide range of magnet wire sizes with a single terminal
Standard range terminals connect 34-18 AWG [0.16- 1.0 mm] magnet wire
Fine range terminals connect 36-27 AWG [0.13- 0.38 mm] magnet wire
Medium range terminals connect 23-12 AWG [0.56- 2.03 mm] magnet wire
Excess magnet wire is automatically trimmed during the termination process
Available in strip form for semi-automatic or fully automatic insertions
Loose piece terminals available for hand tool insertions
High-speed automatic coil winding machine terminations provide uniform reliability at the lowest possible applied cost
Clean metal-to-metal interface produces stable, gas-tight electrical terminations free of oxides and other contaminants